Features:
¡´cost-effective -
TAI-YIH SUN K-004 paddle wheel is 4-wheel structure with three floating boat and big stainless steel frame while using 2HP motor and high-quality reducer so that the paddle wheel K-004 can be more stable and not easy to swing during operation. However, there are four wheel for the oxygen generation and create a bigger water flow and more dissolved oxygen. It can decrease the Q'TY of paddle wheel use and reduce the cost of purchase.

¡´Large and deep water flow-
TAI-YIH SUN K-004 paddle wheel to compare with the 2-wheel paddle wheel with larger water flow and more dissolved oxygen, the most important to apply in deep shrimp ponds . Due to the large flow and more wide range of oxygen caused by 4-wheel paddle wheel, it is a easy-proliferation for the bottom of the ponds. Applicable to large-scale aquaculture ponds or deep water, high-density breeding, and high level of dissolved oxygen aquaculture.

¡´High efficiency -
TAI-YIH SUN K-004 paddle wheel could provide oxygen for 800kg of black tiger shrimp or for 1200kg of white shrimp ( vanname shrimp ) comparing the 2-wheel paddle wheel for 500kg of black tiger shrimp or 800kg of white shrimp, but also provides a higher level of dissolved oxygen in large.

 

 


NO
DESCRIPTION
Q'TY
Specification(mm)
Materal
1
Motor
1
2HP x 4P x3
Tai Yih Sun Brand
2
Worm Gear
1
1:14(50Hz) 1:17 (60H)
Gear:aluminum bronze
3
Stainless steel frame
1
725W x 1650L
AISI 304 Stainless Steel
4
ReducerFloating boat
3
300 x210x1800
H.D.P.E
5
Wheel
4
220Wx 670
Nylon
6
Stainless steel shaft
2
25 x 850L
AISI 304 Stainless Steel
7
Stainless steel movable joint
2
25 x 90 x 90
AISI 304 Stainless Steel
8
Engine cover
1
200 x 290 x 610
H.D.P.E
9
Pillow block
2
120H x 220L
Nylon
10
Plastic fixture Machine setting bar
2
3/4" S.G.P. x 2000
Galvanized Steel Bar
Paddle Installation Notes:
1. The arrow of floating boat must be inspected during assembly, the direction of impeller (such as arrows) and direction of rotation reducer (marked on reducer), three arrows have to point to the same direction to be the right assembly.
2. Assembled reducer must be inspected when it is loaded with gear oil, and oil has to be loaded 80% full.
3. After waterwheel assembly, if the axis of stainless steel (stainless steel shaft) and the axis of reducer is in line.